EN
GUANLIN MERV 13 pleated panel filter, high efficiency HVAC air filter for commercial and cleanroom air handling.
MERV 13 rated pleated panel filters for air handling units needing high particulate capture with acceptable pressure drop and long service intervals.
Description
MERV 13 is the practical ceiling for a disposable panel filter. It captures the fine particulate fraction that MERV 8 lets through — the size range that stains ceilings, fouls coils and carries airborne microorganisms — while still fitting into a standard 2-inch filter rack without a housing change. For buildings that need better indoor air without rebuilding the air handling plant, it is the obvious step up.
Why Choose GUANLIN MERV 13 Panel Filters
- MERV 13 rating — high capture of fine particulate.
- Standard frame sizes — drops into existing racks.
- High media area — low resistance for the efficiency achieved.
- Stable pleat spacing — no pocketing, no bypass.
- Moisture resistant — holds strength in humid air streams.
- Cost effective — high efficiency at disposable prices.
Application Scenarios
Commercial office HVAC
Improved indoor air quality in air handling units.
Hospitals and clinics
General ward and corridor air treatment.
Schools and public buildings
High occupancy ventilation filtration.
Cleanroom pre-filtration
Protecting terminal HEPA stages.
Data centre air handling
Protecting cooling coils and servers.
Pharmaceutical support areas
HVAC filtration before final stages.
Our Factory
GUANLIN has manufactured filtration products in Dongguan since 2003, operating a 6,000 m² plant with automated filter bag sewing lines, automated singeing equipment, cage welding systems and pleated filter production lines. Products are exported to Singapore, Vietnam, Malaysia and other markets, with ISO 9001 and ISO 14001 certified quality management.
Product Specifications
| Item | Specification |
| Rating | MERV 13 |
| Frame | Moisture resistant cardboard |
| Media | Synthetic, hot-melt separators |
| Depth | 1 inch / 2 inch / 4 inch |
| MOQ | 100 pcs |
FAQ
Q1. Will MERV 13 overload my fan?
Usually not, if the rack was designed for a loaded filter; we can advise on pressure drop.
Q2. How often to change?
Typically every 2–3 months, or on pressure drop.
Q3. Is it available in custom sizes?
Yes, produced to your dimensions.
Q4. MOQ and lead time?
100 pcs, 10–20 days.
Key Specifications
- Rating: MERV 13
- Type: pleated panel, cardboard frame
- Media: synthetic, hot-melt separators
- MOQ: 100 pcs
