EN
GUANLIN spray booth exhaust filter media, fibreglass paint arrestor pad for automotive refinishing booths.
Fibreglass paint arrestor pads for automotive refinishing and industrial spray booths, trapping overspray through the full depth of the media.
Description
An automotive refinishing booth runs several full vehicle coats a day. The exhaust filter sees a heavy, continuous overspray load and has to keep the fan curve stable until the next scheduled change. That demands depth loading media, not a surface filter: paint has to penetrate and deposit through the mat rather than closing the face.
Why Choose GUANLIN Spray Booth Filter Media
- Depth loading — paint deposits through the mat, giving very high holding capacity.
- Progressive density — coarser entry face, finer outlet face for improved capture.
- Low face velocity — prevents overspray bouncing off the media.
- Solvent resistant — stable with both solvent-borne and water-borne paints.
- Standard pad sizes — fits common booth filter frames.
- Roll format available — cut to your booth geometry.
Application Scenarios
Automotive refinishing booths
Full-body respray work with heavy overspray per cycle.
Preparation stations
Primer and filler overspray captured before the main booth.
Industrial coating lines
Continuous coating with high paint consumption.
Furniture and wood coating
Solvent and water-borne finishes on panel lines.
Powder coating pre-stage
Coarse arrestor ahead of cartridge recovery filters.
Marine and heavy equipment painting
Large surface area coating with heavy overspray.
Our Factory
GUANLIN has manufactured filtration products in Dongguan since 2003, operating a 6,000 m² plant with automated filter bag sewing lines, automated singeing equipment, cage welding systems and pleated filter production lines. Products are exported to Singapore, Vietnam, Malaysia and other markets, with ISO 9001 and ISO 14001 certified quality management.
Product Specifications
| Item | Specification |
| Media | Non-woven fibreglass, progressive density |
| Thickness | 50 / 75 / 100 mm |
| Standard Sizes | 1×2 m pads, 1×20 m rolls |
| Paint Compatibility | Solvent-borne and water-borne |
| MOQ | 50 pcs |
FAQ
Q1. How often should pads be changed?
When the face is visibly loaded or airflow drops; typically weekly in a busy booth.
Q2. Will it work with water-borne paints?
Yes, advise us of the paint type so we can recommend the right grade.
Q3. What thickness should I use?
50 mm for light overspray, 100 mm for heavy full-body work.
Q4. MOQ and lead time?
50 pcs, 7–15 days.
Key Specifications
- Media: non-woven fibreglass
- Format: pads and rolls
- Thickness: 50–100 mm
- MOQ: 50 pcs
