GUANLIN ceramic heat storage ball, high alumina packing media for RTO and regenerative thermal oxidiser beds.
High alumina ceramic heat storage balls used as random packing in regenerative beds, offering high heat capacity and thermal shock resistance at low cost per cubic metre.
Description
Where a regenerative bed is packed with random media rather than structured honeycomb, the ceramic ball remains the workhorse: cheap per cubic metre, thermally stable, and easy to top up when the bed settles. GUANLIN heat storage balls use high alumina composition for heat capacity and thermal shock resistance in cyclic RTO service.
Why Choose GUANLIN Ceramic Heat Storage Balls
- High heat capacity — alumina composition stores more heat per unit volume.
- Thermal shock resistance — survives rapid cycling without spalling.
- Low cost per cubic metre — the economical option for large random-packed beds.
- Uniform sizing — consistent void fraction and pressure drop.
- Chemical stability — resists acid condensate and ash.
- Easy top-up — beds can be replenished as media settles.

Application Scenarios
RTO and regenerative oxidisers
Random-packed beds for heat recovery in VOC abatement systems.
Regenerative burners
Heat storage between firing cycles in high temperature furnaces.
Hot blast stoves
Heat exchange media for blast heating in ironmaking.
Foundry and kiln regenerators
Heat recovery from periodic kiln exhaust.
Chemical process heat storage
Buffering heat in batch processes.
Waste heat recovery
General industrial exhaust heat capture.

Our Factory

GUANLIN has manufactured filtration products in Dongguan since 2003, operating a 6,000 m² plant with automated filter bag sewing lines, automated singeing equipment, cage welding systems and pleated filter production lines. Products are exported to Singapore, Vietnam, Malaysia and other markets, with ISO 9001 and ISO 14001 certified quality management.
Product Specifications
| Item | Specification |
| Material | High alumina ceramic |
| Alumina Content | 70–95% (grade dependent) |
| Size | 8 / 12 / 16 / 20 / 25 mm |
| Bulk Density | 1.3–1.8 g/cm³ |
| Max Service Temperature | Up to 1,200°C (grade dependent) |
| MOQ | 1 cbm |

FAQ
Q1. What size should I use?
Smaller balls give more surface area but higher pressure drop; 12–16 mm is common for RTO beds.
Q2. How much alumina do I need?
Higher alumina for higher temperature and better thermal shock resistance.
Q3. Can I mix sizes?
Not recommended — mixed sizes change the void fraction and pressure drop.
Q4. MOQ and lead time?
1 cbm, 20–30 days.
Key Specifications
- Material: high alumina ceramic
- Size: 8–25 mm
- Application: RTO / regenerative beds
- MOQ: 1 cbm





